MS-26 reinforcing mesh welding machine
The line wire and the weft wire are pre-straight and pre-cut. The line wire is feeding by the servo motor , pulling the wire net by the servo motor auto. The welding power comes from the cylinders. They are easy to control the welding pressure . The weft wire feeding from the multi hopper which capacity is more over ten times than the traditional hopper. The new machine added the bear wire net and carry equipment that makes the working more convenience . The welding part is used the springiness input wire trucking that makes the welding copper use for long time. This machine adopts synchronous control technique. The cent-control and welding time are composed of PLC program system. The input front-panel is touch screen , the operate is more intelligent and reasonable.
Main technical parameters:
Wire diameter 5.0-12mm Line wire form pre-cut wire
Weft wire distance Mini 25mmWeft wire former-cut wire
Line wire distance100-300mmRated voltage380V
Welding net width2500mmRated power140KVA X 12
Welding speed25times/min Overall dimension24 X 6.0 X 2.65M line wire No.24Length wire net 6000mm

MS-27 Steel Wire Mesh Welding Machines
Size of mesh (mm) 6.35-12.7 (1/4"-1/2")
Width (mm) 914.4-1219.2(12"-48")
Diameter of wire (mm) dia.0.45-dia.1.07 (BWG25-BWG19)
Biggest rolled net size (m) 120m (400')
Welding speed (mesh/minute) 75 (radian)
Power 380/220V50-60HZ50KWA x 4
Outside size measurement (mm) 2350 x 1820 x 1700

MS-28 steel Wire Mesh Welding Machines
Size of mesh (mm) 12.7-101.6 (1/2"-4")
Width (mm) 914.4-1219.2(12"-48")
Diameter of wire (mm) dia.0.63-dia.2(BWG25-BWG19)
Biggest rolled net size (m) 120m (400')
Welding speed (mesh/minute) 65 (radia)
Power 380/220V50-60HZ50KWA x 4
Outside size measurement (mm) 2600 x 1700 x 1350

For more details or requirements, please fax or email us