NEWS

Plain weave stainless steel wire mesh, is one of the stainless steel woven mesh weaving method. Hebei Maishi wire mesh can produce plain weave, twill weave, dutch weave and reverse weave stainless steel mesh.
What is the characteristics of plain weave stainless steel wire mesh?
Hebei Maishi wire mesh’s plain weave stainless steel wire mesh has follows characteristics :
Material:AISI304, AISI304L, AISI310, AISI310S, AISI316, AISI316L, AISI317 , refer Stainless Steel Wire Mesh Alloys
Same warp and weft wire diameter
Density of warp and weft wire is the same.
Each wire is woven alternately over and under the warp wires through the cloth at 90 degree angles, Square hole.
Hebei Maishi wire mesh production of plain weave stainless steel wire mesh, easy to clean , precise, uniform, structural precision, high liquidity, strong and durable.

Hebei Maishi wire mesh’s plain weave stainless steel wire mesh, widely used in industry and construction sand screening , petrochemical , oil industry make mud mesh, ink screen printing, chemical fiber industry screen filter , rubber, metallurgy, medicine, food , environmental protection All minerals , coal , aerospace , paper , electronics, electroplating industry for acid washing their nets , filters , etc. , can also be used to protect the mechanical attachment.

Plain weave stainless steel wire mesh specification detailed resolution:
For example P400-316L-0.07mm 1M * 30M
"P"means “Plain” or some chinese think it is Pingzhi,. "400" means 400 mesh., "316 L" means material is stainless steel AISI316 L, "0.07mm" is the thread section 0.07mm diameter . "1M" width of mesh, "30M" length or roll
Hebei Maishi wire mesh can weave plain weave stainless steel wire mesh from 0.5meshx3.0mm to 400meshx0.025mm, details please click Stainless Steel Plain Weave Wire Mesh
Additional our plain weave stainless steel wire mesh 180meshx0.053 to 400meshx0.025mm are mostly used for printing. Welcome to ask any question about plain weave stainless steel wire mesh.